https://preview.redd.it/3mx7amtio9g11.png?width=696&format=png&auto=webp&s=f2bd956843196fa2f51048a86f9608b6e714f62esubmitted by noxonsu to SwapOnline [link] [comments]
On the eve of the release on the mainnet, the team of the cross-chain wallet Swap Online is publishing a research study and the code of the atomic swapusing USDT.
USD Tether — the equivalent of the dollar on Omni LayerThe solution described above with the protocol “over” the Bitcoin network gave life to one of the most controversial cryptocurrency projects of the last two years — Tether. Tether (symbol Tether — ₮, ticker — USDT) is a hybrid cryptocurrency with a rate binding to one US dollar. Moreover, according to the assurances of Tether Limited, the issuer of the given tokens, the “binding” is to be understood literally, as each purchased token of USDT corresponds to one US dollar available at the disposal of the company.
If we take the three largest exchanges based on their daily turnover of transactions at the time of writing (Binance, OKEx and HuObi), and then track the five most popular trading pairs for each, we will encounter USDT in 13 out of 15 cases.
USDT — the token with the largest capitalization in the world.All this generates great community interest in faster, safer and cheaper solutions for exchanging Tether into other currencies. Obviously, such a solution could be atomic swaps, which are instant, decentralized cross-chain exchanges. The Komodo laboratory, the main headliners of this technology, who presented it in the autumn of 2017, reported on the successful exchange of KMD to USDT carried out on the BarterDEX platform, Komodo’s own exchanger.
At the same time, according to our data, the developers of Komodo made a swap on the ERC20-a version of Tether, which is only available in 3% of cases. Approximately 60 million USDT from global turnover can thus be exchanged using this method, which, obviously, cannot be considered as a solution to the problem. Striking examples of imperfections of existing solutions can be found even on Etherscan.
This fall, the team of Swap Online is ready to present an atomic swap with Tether. And here’s how we did it.
How Omni conducts transactionsTo carry out the Omni transaction, a user needs to create a regular Bitcoin transaction-transfer of 546 satoshi (minimum) with an additional output storing payload using the OP_RETURN op-code. An example of such a transaction. The payload is a mandatory part of any Omni transaction, as it is a sequence of bytes containing all the necessary information about the transaction.
Let us consider what information is stored in the payload itselftransaction marker — 4 bytes, the mandatory part of any Omni payload is always equal to 0x6f6d6e69 — ASCII code omni. If the first 4 bytes of the sequence are not equal to 0x6f6d6e69, then this sequence is not a payload of Omni.
version — 2 bytes, an analog version of the transaction in Bitcoin. For the described algorithm to work, version 0 is used, or that is the same as 0x0000.
transaction type — 2 bytes, transaction type, for an atomic swap it is sufficient to use only “Simple send” transactions, as simple send is the usual sending of omni currency from its address to the address of the recipient. Simple send corresponds to the transaction type code 0, that is, the next 2 bytes 0x0000. Other possible types of transactions exist in Omni.
token identifier — 4 bytes, identifier of the currency used. For example TetherUS has the identifier 31 or 0x0000001f. All tokens created by the Omni protocol at this time can be seen via the following link.
amount — 8 bytes, for a transaction of type Simple send, this is the amount of the sent currency.
As you can see, payload does not store the addresses of senders and recipients of the transactions, these addresses are determined by the Bitcoin transaction in which the payload output was detected. By scanning inputs, the Omni protocol determines who makes the transfer by finding the output of the corresponding address from among the inputs of the transaction p2pkh.
Thus, for a transfer from Alice to Bob of, for example, 50,000,000 TetherUS, we need to create a Bitcoin transaction where one of the inputs will refer to the p2pkh output corresponding to the Alice address. It is also important that this entry be the first in this transaction (the index of this entry in the received transaction would be is minimal or none at all). One of the outputs of this transaction should be the output of p2pkh to Bob’s address, and another output must have been one of the outputs with the following payload:
Atomic Swap on Omni LayerSuppose that Alice and Bob are willing to make an inter-blockchain exchange of cryptocurrencies. Alice wants to exchange the units of any Omni currency, for example TetherUS (the given currency has the currency identifier # 31 in the Mainnet, then in the text we will only talk about this currency of the Omni protocol, since it is the most popular at the moment, but the algorithm below will work for any currency of the Omni protocol as well) for b units of a cryptocurrency working on another blockchain. (Omni works on top of the Bitcoin blockchain, of course, according to the algorithm below it is possible to exchange TetherUS for Bitcoins, but due to their work on one and the same blockchain, this exchange can be done in a different, more efficient way).
GlossaryA — blockchain of Bitcoin.
B — the blockchain of the cryptocurrency for which TetherUS is being exchanged.
a — the sum of TetherUS, which Alice wants to exchange.
b — the sum of the cryptocurrency of the adjoining blockchain B, to which Alice wants to exchange her a TetherUS.
Creating a Transaction1) Bob generates a random value secret.
2) Bob calculates the secretHash by performing the following operation: secretHash = RIPEMD160 (secret)
3) Bob creates and sends an htlc transaction sealed by secretHash
4) Bob sends Alice a secretHash value, and a hash of the hrlc transaction he created in the previous paragraph in order for Alice to make sure that the correct htlc transaction is actually present in the B blockchain.
5) Alice received from Bob the secretHash and hash of the htlc-transaction Bob created, and is convinced that such a transaction is really present in the B blockchain, and that this is indeed a htlc-transaction sealed by the secretHash value.
6) using the received secretHash, Alice creates the following transaction and translates it into the Bitcoin blockchain:
Let us call such a transaction financing_tx. In fact, it is almost an ordinary Bitcoin htlc transaction that is used in atomic swap with the only difference that in the amount field, 546 satoshi is the minimum number of Bitcoins that can be at the output of the transaction, below this value, Bitcoin counts the transaction as dust and does not conduct it.
7) Alice creates a transaction according to the following scheme:
Let us call this transaction redeem_tx. Alice creates such a transaction with two inputs: the first is the input referencing the output of funding_tx, which contains the htlc script. Alice does not sign this script, that is, the SigScript field remains completely empty. The second input is the input referring to any unspent exits of Alice, the main condition is that at this output stage there are enough Bitcoins to pay the transaction fee, and this entry is signed by Alice with her private key with the signature type SIGHASH_ALL (that is, she signs the entire transaction except for SigScript fields on the inputs transaction, which makes this transaction immutable. The outputs of the same transaction are the elementary Simple Send and a TetherUS from Alice to Bob (details of what Simple Send, payload is and how it works can be found in another section).
8) Alice sends Bob the redeem_tx created in the previous paragraph and the one she signed herself.
9) Bob got the redeem_tx sent by Alice, checks it, just looks through the inputs and outputs, making sure that this is really a transaction that Alice should have created using the real algorithm. After that, Bob signs the transaction with his private key and provides the secret value in the SigScript of the corresponding redeem_tx entry.
10) Bob sends the signed redeem_tx transaction to the blockchain, thereby transferring the TetherUS currency from Alice to himself. Note — before carrying out this step, we still need to check that Alice’s address has the necessary amount of TetherUS.
11) Alice looks through blockchain A and gets the value secret and uses it in the B blockchain to transfer the funds using the htlc transaction Bob created in point 3. The exchange ends here.
Stating the obvious: naturally the timelock value used by Bob when creating the htlc-transaction must be significantly longer than the timelock that Alice uses, since her htlc transaction should be spent earlier than the htlc created by Bob. This is necessary so that Bob cannot manage to spend both htlc.
ConclusionThus, connecting Omni Layer to Swap Online allows users to cover transactions.
Full research you may find in our GithubC++ source code for creating TX
C++ source code for redeem TX
Swap.Online Essential LinksWebsite: https://testnet.swap.online GitHub: https://github.com/swaponline Email: [email protected] Telegram: https://t.me/swaponline Facebook: https://www.facebook.com/Swaponline Twitter: https://twitter.com/SwapOnlineTeam Wiki: https://wiki.swap.online/ Bitcointalk: https://bitcointalk.org/index.php?topic=4636633
Scalability is a large issue, as ordinary Bitcoin stores the total list of unspent outputs on a node with limited storage. Cryptonote stores all of this on RAM, which severely limits its potential to scale. This can be changed through forcing users to store only outputs of the keys they own and a few others to remain anonymous. Improving on this system allows for the equivalent of CoinJoin-ing ... Recently a user contacted us seeking for help. They seem to have transferred Bitcoin from electrum wallet to their Binance account. Upon checking the transaction details on block explorer they noticed that there was a 2nd address where some of their coins were sent. If it is your first Bitcoin transaction then this may seem confusing and ... Binance-coldwallet Bitcoin Wallet with balance chart. 0.504% of all coins: Received: count: 971. first: 2017-12-08 07:51:10 UTC. last: 0:43 — “… nodes or computers in the Bitcoin network apply that transaction to their copy of the ledger …” This is a bit of simplification. Nodes relay new transactions to other nodes on the network if the transaction passes basic validation (i.e. if unspent outputs exist, has valid signature, and is not a double spend). 1NDyJtNTjmwk5xPNhjgAMu4HDHigtobu1s Bitcoin address with balance chart. wallet: Binance-wallet: Received: 10,793,228.01 32 BTC (551345 ins). first: 2017-08-08 10:32:55 UTC On the most recent episode of the Stephan Livera podcast, Bitcoin Engineer at BitGo, Murch, spoke about Bitcoin coin alternative and its impression on transaction expenses on the Bitcoin group. Coin alternative roughly refers again to the tactic whereby the Bitcoin networks algorithm ends up selecting cash from its UTXO [unspent transaction output] for upcoming transactions. The Bitcoin users who use the privacy tool Coinjoin to add anonymity to their transactions are now facing a major wake-up call. In the latest cryptocurrency news, we can see that Binance returns the funds that it froze in the withdrawal.. An ongoing Twitter debate which started on December 19 showed that a user by the name of Catxoloti uploaded a correspondence from Binance Singapore staff ... This is the size of full Bitcoin transaction history for the past 10 years and it is also the amount of information full mining nodes that are needed to download and to keep on their hard drives after synchronizing with Bitcoin’s network. The BTC blockchain grew to 300 gigabytes while the amount o data seems quite significant, the terabyte hard drive will easily cover it and will continue to ... Bitcoin Fee Calculator. This page will give you a guide on the lowest fee to use to get your transaction included within the next few blocks. It works by predicting the size of a transaction and comparing it to another transaction in a recent block to determine an appropriate fee. Recommended Fee: 0.00000000 BTC for a transaction of 0 bytes? Sat/Byte. 0 Inputs. 0 Bytes. Regular Compressed 1 ... bitaps.com provides Bitcoin explorer web service allowing to track transactions, blocks and address balances. Bitcoin tools, payment processing and open API.
[index]          
Trading Bitcoin: 4 Steps to Calculate Your Position Size - Risk Management EXPLAINED - Duration: 6:20. Sell The Spike 6,885 views. 6:20. STOP LIMIT ORDER TUTORIAL: BINANCE & GDAX! How to set a ... Total Tokens Allocated to Binance Launchpad: 1,575,000,000 ONE (12.5% of Total Token Supply) Public Sale Token Price: 1 ONE = 0.003175 USD (price in BNB will be determined on the lottery draw date ... Maximum daily profits proved using my crypto trade calculator Net Profit: $671.88 ROI: 38.98% Must watch video: https://www.youtube.com/watch?v=Xc9TwWJZoWM&l... Checkout my new video: https://www.youtube.com/watch?v=BKCCgB99Rto&t=265s #Bitcoin, #CryptoTrading, #Binance, ️Please like, SUBSCRIBE & Share the video ️ ⚡... Bitcoin ( BTC ) resurgence is continuing to sap capital from the altcoin markets as other cryptocurrencies are struggling to catch up to BTC. The DeFi Compos... Referall links Bybit https://www.bybit.com/app/register?ref=wrrmX Binance https://www.binance.com/en/register?ref=GN9ZX0ZA Bitmax https://btmx.com/#/register... Video Highlights: Bitcoin Profit Loss Calculator App Binance New Feature Koinex Free Trading Option #Delta #Bitcoin #cryptotamil In this video I demonstrate How to calculate profit loss when using Triangular Arbitrage Binance Bot and incorporating fees with a Profit/Loss tracking system and data logged to Crypto Triangular ... This video is a brief introduction on #Options Trading in #Binance JEX Exchange Binance JEX belongs to Binance.com. Here in Binance JEX, you can trade #Bitcoin Futures, Bitcoin Options, Ethereum ... How to Short Bitcoin on Binance 125X Leverage Binance Futures Tutorial - Duration: 13 ... Using The Binance Futures Liquidation Calculator To Determine Your Position Size - Duration: 4:25 ...